Compression along the Easy-Glide Orientation of Ultrafine and Fine-Grained Mg-3Al-1Zn AlloyLEE, W. T; CHOU, Y. W; HSIAO, C. I et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 13, pp 3282-3286, issn 1073-5623, 5 p.Article

Processing and ballistic performance of lightweight armors based on ultra-fine-grain aluminum compositesLIN, Timothy; QUAN YANG; CHUHU TAN et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7344-7348, issn 0022-2461, 5 p.Conference Paper

Nanomaterials : Bridging the gap between solid-state physics and materials science : NanomaterialsDUTTA, J; HOFMANN, H.Analusis (Imprimé). 1996, Vol 24, Num 6, pp M8-M9, issn 0365-4877Article

Anisotropy analysis of ultra-fine grain graphite and pyrolytic carbonCAMPBELL, Anne A; CAMPBELL, Kent B; WAS, Gary S et al.Carbon (New York, NY). 2013, Vol 60, pp 410-420, issn 0008-6223, 11 p.Article

Coordinated transformations for high-level synthesis of high performance microprocessor blocksGUPTA, Sumit; KAM, Timothy; KISHINEVSKY, Michael et al.Design automation conference. 2002, pp 898-903, isbn 1-58113-461-4, 6 p.Conference Paper

Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten AlloysCORDERO, Zachary C; HUSKINS, Emily L; MANSOO PARK et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 8, pp 3609-3618, issn 1073-5623, 10 p.Article

Deformation Structure of Unidirectionally Compressed Ultrafine-Grained Mg-3Al-1Zn AlloyLEE, W. T; DING, S. X; SUN, D. K et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2011, Vol 42, Num 9, pp 2909-2916, issn 1073-5623, 8 p.Article

The effect of multiple deformations on the formation of ultrafine grained steelsBELADI, Hossein; KELLY, Georgina L; HODGSON, Peter D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 3, pp 450-463, issn 1073-5623, 14 p.Article

XRD profile analysis characterization of ultrafine grained Al-Mg alloysDINKEL, Markus; PYCZAK, Florian; MAY, Johannes et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7481-7487, issn 0022-2461, 7 p.Conference Paper

Study of hyper-interfacial bonding of ultrafine-grained steelsJEONG, B; NISHIMOTO, K; SAIDA, K et al.Welding international. 2005, Vol 19, Num 4, pp 287-296, issn 0950-7116, 10 p.Article

Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bondingHÖPPEL, Heinz Werner; MAY, Johannes; GÖKEN, Mathias et al.Advanced engineering materials (Print). 2004, Vol 6, Num 4, pp 219-222, issn 1438-1656, 4 p.Article

Enhanced Mechanical Properties of As-Forged Co-Cr-Mo-N Alloys with Ultrafine-Grained StructuresYAMANAKA, Kenta; MORI, Manami; CHIBA, Akihiko et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 13, pp 5243-5257, issn 1073-5623, 15 p.Article

XRD profile analysis of ECAP Cu and Cu + Zr samplesMATEJ, Zdenek; KUZEL, Radomir; DOPITA, Milan et al.International journal of materials research. 2009, Vol 100, Num 6, pp 880-883, issn 1862-5282, 4 p.Conference Paper

Mechanical properties and corrosion behaviour of ultrafine-grained AA6082 produced by equal-channel angular pressingHOCKAUF, Matthias; MEYER, Lothar W; NICKEL, Daniela et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7409-7417, issn 0022-2461, 9 p.Conference Paper

Crack growth in ultrafine-grained AA6063 produced by equal-channel angular pressingMEYER, Lothar W; SOMMER, Kristin; HALLE, Thorsten et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7426-7431, issn 0022-2461, 6 p.Conference Paper

Dynamic evolution of fine grain structure during hot deformation of an AZ31 magnesium alloyYANG, Xuyue; MIURA, Hiromi; SAKAI, Taku et al.Keikinzoku. 2002, Vol 52, Num 7, pp 318-323, issn 0451-5994Article

Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in NickelLIU, X. C; ZHANG, H. W; LU, K et al.Science (Washington, D.C.). 2013, Vol 342, Num 6156, pp 337-340, issn 0036-8075, 4 p.Article

Processing of Ultrafine-Grained Materials through the Application of Severe Plastic DeformationKAWASAKI, Megumi.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2011, Vol 42, Num 10, pp 3035-3045, issn 1073-5623, 11 p.Article

Effect of strain on hardening by annealing and softening by deformation phenomena in ultra-fine grained aluminumTERADA, Daisuke; HOUDA, Hironobu; TSUJI, Nobuhiro et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7331-7337, issn 0022-2461, 7 p.Conference Paper

Grain growth in ultrafine grained aluminium processed by hydrostatic extrusionLEWANDOWSKA, Malgorzata; WEJRZANOWSKI, Tomasz; KURZYDTOWSKI, Krzysztof J et al.Journal of materials science. 2008, Vol 43, Num 23-24, pp 7495-7500, issn 0022-2461, 6 p.Conference Paper

Ultrafine grained structure formation in steels using dynamic strain induced transformation processingBELADI, H; KELLY, G. L; HODGSON, P. D et al.International materials reviews. 2007, Vol 52, Num 1, pp 14-28, issn 0950-6608, 15 p.Article

The influence of zirconium on the low-cycle fatigue response of ultrafine-grained copperGABOR, P; CANADINC, D; MAIER, H. J et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 9, pp 1916-1925, issn 1073-5623, 10 p.Conference Paper

Putting data value predictors to work in fine-grain parallel processorsAGGARWAL, Aneesh; FRANKLIN, Manoj.Lecture notes in computer science. 2001, pp 204-213, issn 0302-9743, isbn 3-540-43009-1Conference Paper

Formability of Ultrafine-Grained Interstitial-Free SteelsSARAY, Onur; PURCEK, Gencaga; KARAMAN, Ibrahim et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 9, pp 4194-4206, issn 1073-5623, 13 p.Article

Influence of Process Parameters on the Mechanical Behavior of an Ultrafine-Grained Al AlloyTOPPING, Troy D; AHN, Byungmin; YING LI et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 2, pp 505-519, issn 1073-5623, 15 p.Article